Husqvarna 545 Mark II Manuel D'utilisation page 34

To prepare your product for long-term
storage
1. Stop the product and let it become cool before you
disassemble it.
2. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION:
guide bar are not cleaned, they can
become rigid or blocked.
3. Attach the transportation guard.
Technical data
Husqvarna
545 Mark II
Engine
Cylinder dis- 50.1
placement,
3
cm
Idle speed, 2800
rpm
Maximum en- 2.7/3.6 @
gine power 9900
acc. to ISO
7293, kW/hp
@ rpm
1
Ignition system
Spark plug NGK CMR6H
Electrode gap, 0.5
mm
Fuel and lubrication system
Fuel tank ca- 0.53/530
pacity,
3
liter/cm
Oil tank ca- 0.32/320
pacity,
3
liter/cm
Type of oil Adjustable
pump
Weight
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
34
If the saw chain and
Technical data
Husqvarna Husqvarna
545G Mark II 550XP Mark II
50.1 50.1
2800 2800
2.7/3.6 @ 3.0/4.0 @
9900 10200
NGK CMR6H NGK CMR6H
0.5 0.5
0.53/530 0.53/530
0.32/320 0.32/320
Adjustable Adjustable
4. Clean the product. Refer to
on page 22 for instructions.
5. Do a complete servicing of the product.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as oil or fuel, at a service
center or at an applicable disposal location.
• When the product is no longer in use, send it to
a Husqvarna dealer or discard it at a recycling
location.
Husqvarna
550XPG Mark
II
50.1
2800
3.0/4.0 @
10200
NGK CMR6H
0.5
0.53/530
0.32/320
Adjustable
Maintenance schedule
Husqvarna Husqvarna
550XP Mark II 550XPG Mark
TrioBrake II TrioBrake
50.1 50.1
2800 2800
3.0/4.0 @ 3.0/4.0 @
10200 10200
NGK CMR6H NGK CMR6H
0.5 0.5
0.53/530 0.53/530
0.32/320 0.32/320
Adjustable Adjustable
544 - 011 - 09.11.2023