Husqvarna 545 Mark II Manuel D'utilisation page 3

11. Fuel level window
12. Fuel tank
13. Air purge bulb
14. Starter rope handle
15. Starter housing
16. Chain oil tank
17. Muffler
18. Chain brake and front hand guard
19. Front handle
20. Switch for heated handles (545G Mark II, 550XPG
Mark II)
21. Right hand guard
22. Clutch cover
23. Clutch drum
24. Oil pump adjustment screw
25. Chain tensioning screw
26. Chain catcher
27. Spiked bumper
28. Saw chain
29. Guide bar
30. Bar tip sprocket
31. Brake band
32. Guide bar cover
33. Operator's manual
34. Combination wrench
35. Rear brake trigger (550XP Mark II TrioBrake,
550XPG Mark II TrioBrake)
Symbols on the product
Stop.
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
Use 2 hands to operate the product.
544 - 011 - 09.11.2023
Do not let the guide bar tip touch an
object.
Do not operate the product with one hand
only.
Warning! Kickback can occur when the
guide bar tip touches an object. A
kickback causes a lightning fast reverse
reaction that throws the guide bar up and
in the direction of the operator. Can cause
serious injury.
This product complies with applicable EC
Directives.
This product conforms to the applicable
UK regulations.
Noise emission to the environment label
as per European Directive 2000/14/EC,
UK directives and regulations and New
South Wales legislation "Protection of the
Environment Operations (Noise Control)
Regulation 2017". The guaranteed sound
power level of the product is specified in
Technical data on page 34 and on the
label.
Chain brake, engaged (right). Chain
brake, disengaged (left).
Choke.
Air purge bulb.
Adjustment of the oil pump.
Fuel.
Chain oil.
3