Publicité
Les langues disponibles
Les langues disponibles
Advantage: Unintentional closing of the door, or accidental closing of the
door by persons who have access to your home during your absence, is no
longer possible. Without the stand-by mode leaving the door closed would
lead to the accumulation of odours and mould.
After emptying and cleaning the appliance, proceed as follows:
1.To activate the holiday setting, press the "+" (WARMER) or "-" (COLDER)
button. The temperature display will change and indicate in flashing numbers
the DESIRED temperature that is currently set.
2.Hold down the "+" (WARMER) button until the temperature display
indicates H (for holiday). The temperature shown in the temperature display
will change in steps of 1°C until it reaches +8°C. After +8°C the value +15°C
will appear in the display with the letter H. The fridge is now operating in
energysaving holiday mode.
3.After a few seconds the temperature display will again change to the
ACTUAL emperature. The display will change from flashing to continuous
illumination.
To switch the fridge back to normal operation, press the "-" (COLDER) button.
Important! Do not store any goods in the refrigerator when the
standby mode is operational. The temperature is regulated at about
+15°C when the stand-by mode is operational. This is too warm for food
products.
Internal Parts
Storage shelves
The shelves can be removed for cleaning.
To permit storage of food packages of
various sizes, the shelves can be placed at
different heights.
To remove the internal shelf pull forward
until it can be tipped up or down and
removed.
Please do the same in reverse to insert the
shelf at a different height.
For better use of space, the front
halfshelves can lie over the rear ones.
28
Publicité
