Removal Of Cables From The Control Unit; Mounting/Dismounting The Accessories - Invacare Alegio Manuel D'utilisation

5. Removal of cables from the control unit

Raise the bed to highest position and remove the mains cord
from the socket outlet.
Use a small tool (such as screwdriver) to release the pawl on
the locking cam.
Hold the locking cam while releasing the remaining pawls.
With all pawls released, the locking cam can be removed from the
control unit.
Motor connections are indicated on the label behind the cables.

6. Mounting/dismounting the accessories

Risk of entrapment of fingers during assembly and operation of the bed end and side rail.
Mounting the Vibeke bed end and Verso side rail
1. Lower the bed ends into the U-profiles.
2. Place the side rail with the release system in the leg end, and tighten both finger screws. 0-6 cm
15