Safety Instructions - Alfra Rotabest Rb 35 Sp Manuel D'utilisation

Safety instructions

During work with this machine, improper handling and/or poor maintenance result in significant hazards which can
lead to serious accidents with considerable injuries and destruction of the machine. Please read and observe the
information and safety instructions contained in this operating manual very carefully and contact the manufacturer
should you have any questions.
Always...
activate the switchable permanent magnet completely
•
activate the magnet on metallic, ferromagnetic materials
•
use the whole magnetic surface for working
•
work on level surfaces
•
clean the magnetic surface and keep it clear of dirt, chips, welding sputter
•
set the core drilling machine down gently to prevent damage to the magnetic surface
•
secure yourself with a safety belt when drilling on walls or ceilings
•
check connection cables for damage
•
make sure the mains voltage matches the machine
•
follow the instructions in the operating manual
•
familiarise new users with the safe use of the machine and read and understand the operating
•
manual
wear safety goggles, safety gloves and ear protection during work
•
observe local, country-specific guidelines
•
store in a dry place
•
Never...
work on round or curved objects
•
drill several workpieces on top of one another
•
modify the core drilling machine or remove signs
•
use the core drilling machine when damaged or when parts are missing
•
strain or damage the underside of the magnet through heavy impact or blows
•
use the core drilling machine without having been properly instructed
•
use the core drilling machine to support, lift or transport persons or loads
•
carry out electric welding work on the workpiece at the same time as using the core drilling
•
machine
store or operate the core drilling machine at temperatures above 50° C (122° F)
•
leave the machine hanging unsupervised
•
allow the machine to come into contact with corrosive materials
•
People with cardiac pacemakers or other medical appliances may only use the lifting magnet
following approval by their physician.
Proper use
This device, a magnetic core drilling machine with switchable magnetic clamp, is intended for drilling with core or
solid drills on ferromagnetic workpieces. It may only be used in a dry environment which is protected from the
weather. The machine may be used horizontally, vertically or overhead.
13