Télécharger Imprimer la page

Aircare EVAPORATIVE EXECUTIVE 4DTS900 Mode D'emploi page 7

Masquer les pouces Voir aussi pour EVAPORATIVE EXECUTIVE 4DTS900:

Publicité

Les langues disponibles

Les langues disponibles

ABOUT THE CODES
F
– The F code means your unit is empty and needs to be FILLED with water.
CL
– Your CONTROLS ARE LOCKED on the current setting. Activate the control lock by holding the power button for five
seconds, until CL appears. Your Executive will lock on the current fan and humidity settings. Release the lock by pressing the
power button again for five seconds until the display flashes CL three times, letting you know the lock is off.
CF
– The CF code triggers after 720 hours of use and means it's time to CHECK YOUR FILTER (wick). Unplug your unit and
check your wick. If your wick is still in good shape, simply clear the code by plugging your humidifier back in. If your wick needs
replacing, install a new 1041 Super Wick®.
HOW TO CLEAN YOUR EXECUTIVE
Regular cleaning is important for preventing mold, mildew,
and other bacterial growth in your humidifier. It also keeps
your Executive working its best.
1. Let the unit run until it's empty, then turn it off and unplug it.
2. Remove the fan assembly, bottles, and the wick. Throw your
wick away if it is time to replace it. Otherwise, put it in a sink
while you finish cleaning your Executive.
3. Pour out any remaining water from the cabinet and water tanks.
4. Fill the cabinet half-full with water and add 1 cup of white
vinegar. Let sit for 20 minutes. To disinfect, replace the vinegar
with 1 teaspoon of bleach. Do not mix vinegar and bleach.
5. Fill the water bottles half-full with water and add 1 cup of white
vinegar to each. Put the caps back on, shake the bottles gently,
then let sit for 20 minutes. To disinfect, replace the vinegar
with 1 teaspoon of bleach in each bottle.
6. After 20 minutes, empty the cabinet and bottles.
7. Dampen a sponge with white vinegar, wipe down the cabinet
interior and bottles, then rinse everything thoroughly. To
disinfect, replace the vinegar with bleach. Wipe down the
bottles and cabinet interior only.
8. Wipe everything dry and replace the wick, if needed.
Then reassemble.
When storing your Executive, discard the used wick and disinfect the unit using the
directions above. Dry the unit thoroughly, and store in a temperature-regulated area.
Do not install a new wick until you are ready to use your humidifier again.
All manuals and user guides at all-guides.com
6

Publicité

loading