Aircare EVAPORATIVE EXECUTIVE 4DTS900 Mode D'emploi page 4

4
3
All manuals and user guides at all-guides.com
3
2
Remove everything from the cabinet.
Turn the cabinet over and insert the
casters snugly into the bottom. Just use your
hands! Using tools can crack the cabinet.
3
Turn the cabinet upright and place the
wide end of the float in the circular
area in the bottom of the cabinet. Slide the
float support down to the bottom and position
the screw tabs over the holes in the cabinet
base. Use a Phillips screwdriver to screw in the
float support. Do not overtighten or use a drill.
4
Locate the vent on the back of your
Executive. It has a narrow lip along the
top. Your wick is labeled TOP and BACK. With
the back of your wick facing the vent, and the
top facing up, slide the wick down onto the
vent lip until it catches.
5
Install your 1051 air filter by clipping
the filter's hooks into the slots on
the back of your Executive.
About water additives:
• Do not use essential oils in your Executive.
• Do not use water softeners.
• We recommend our Essick Air Bacteriostat to help inhibit
mold growth.