Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
• "Pause" function (Fig.2 (B)):
GB
This function will set to pause the device, maintaining in
the memory the cooking programs previously set in the
memory.
The hob can remain in this situation for maximum 10
minutes. Then, the hob will switch off permanently.
Activation:
- Select key "Pause" (B) and the relative LED (C) will start
flashing. The symbol
will be displayed.
Restore of the cooking phase:
1. The cooking phase can be restored within 10 minutes.
2. Select key "Pause" (B) and the relative LED (C) will start
flashing.
3. Select one of the cooking area selection keys (E) within
approximately 10 seconds.
• "Recall" function (Fig.2 (B)):
The "Recall" function allows reactivating the hob with
the same set functions in the event that the "ON/OFF"
button is pressed by mistake whilst one or more zones
are activated.
If the "ON/OFF" key is accidentally pressed:
- Select key "ON/OFF" (A) within approximately 6 seconds
and the relative LED (C) will start flashing.
- Select key "Recall" (B) within approximately 6 seconds.
• Maintenance (Fig.7):
Remove any residues of food and drops of grease from
the cooking surface using the special scraper supplied
on request.
Clean the heated area as thoroughly as possible using
SIDOL, STAHLFIX or similar products and a cloth/paper,
then rinse with water and dry with a clean cloth. Using the
special scraper (optional) immediately remove any frag-
ments of aluminium and plastic material that have unin-
tentionally melted on the heated cooking area or residues
of sugar or food with a high sugar content. In this way, any
damage to the cooktop surface is prevented. Under no
circumstances use abrasive sponges or irritating chemical
detergents such as oven sprays or stain removers.
THE MANUFACTURER DECLINES ALL RESPONSIBIL-
ITY FOR EVENTUAL DAMAGES CAUSED BY BREACH-
ING THE ABOVE WARNINGS.
24
Publicité
