Tern Vektron MaxDrive Mode D'emploi page 29

Error Codes
The MaxDrive is capable of error detection. If an error is detected, the display shows the error code.
If Error 21 appears, see Maintenance Section for details on how to adjust the speed sensor.
For other errors, do a reset by powering o the display, wait 30 seconds and then power on.
If the error persists, seek dealer for servicing.
Error code Error definition
High battery voltage fault
07
08 Motor hall sensor fault
High temperature fault
10
12
Current sensor fault
13 Battery temperature sensor fault
Speed sensor fault
21
22 Battery communication fault
Controller communication fault
30
All manuals and user guides at all-guides.com
EN
ES
FR
KO
29