DeWalt DW876 Mode D'emploi page 29

Ripping
• Install the rip fence as described above.
• Set the rip fence for the width of cut required by using the scale.
• Slowly feed the workpiece into the blade, keeping it firmly pressed onto
the table and against the fence. Allow the teeth to cut and do not force
the workpiece through the blade. The blade speed should be kept
constant.
• Use a push stick when close to the blade.
Always switch OFF the tool when work is finished and before
unplugging.
Mitre cuts (fig. N)
• Set the required angle on the mitre fence (6) and secure with the
locking knob (31).
• Use the cut length bar (30) if required. Lock the cut length bar in the
required position using the screw (38).
• Proceed as for ripping.
Bevel cuts
• Set the table to the required angle.
• Install the fence to the right of the blade.
• Proceed as for ripping.
Compound mitre
This cut is a combination of a mitre and a bevel cut.
• Set the table to the required angle and proceed as for ripping.
Freehand cuts
Freehand cuts are performed without the help of a fence.
• Do not attempt to cut curves smaller than the blade will allow.
Dust extraction (fig. A)
The machine is provided with a dust extraction connection outlet (16).
• Whenever possible, connect a dust extraction device designed in
accordance with the relevant regulations regarding dust emission.
Maintenance
Your D WALT Power Tool has been designed to operate over a long
E
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Unwanted tools and the environment
Take your tool to an authorized D WALT repair agent where it will be
E
disposed of in an environmentally safe way.
15
All manuals and user guides at all-guides.com
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D
purchased, to a participating Dealer, or an authorized D
agent, for a full refund or exchange. Proof of purchase must be
produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
12 months following purchase, it will be undertaken free of charge at
an authorized D
produced. Includes labour and spare parts for Power Tools. Excludes
accessories.
• ONE YEAR WARRANTY •
If your D
workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion, replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
For the location of your nearest authorized D
please use the appropriate telephone number on the back of this
manual.
GUARANTEE
WALT machine, simply return it within 30 days, complete as
E
WALT repair agent. Proof of purchase must be
E
WALT product becomes defective due to faulty materials or
E
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
E N G L I S H
WALT repair
E
WALT machine, in the
E
WALT repair agent,
E
en - 5