Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
english
WARnInG: DO nOT turn the LDM on while cleaning
the lens. Serious eye injury may result from staring at the
beam.
• The housing can be cleaned with a wet lint-free cloth such as a
cotton cloth. USE WATER ONLY — DO NOT use cleansers or
solvents. Allow the LDM to air dry before storing.
• To maintain the accuracy of your readings, perform control
measurements periodically. Refer to Field Calibration Check.
• If your LDM requires repair, contact your local D
center.
• When the LDM is not in use, store it in the pouch provided.
• Do not store your LDM in the pouch if it is wet. Dry exterior parts
with a soft, dry cloth and allow the LDM to air dry.
• Do not store your LDM at temperatures below –7 ˚C (20 ˚F) or
above 70 ˚C (160 ˚F).
CAUTIOn: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the laser. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the unit; never immerse any
part of the unit into a liquid. Never use compressed air to
clean the laser.
field calibration check
Measure a known distance [within a 3–10 m (10–30') range] with the
LDM to confirm that the LDM is functioning properly.
Laser accessories
Recommended accessories for use with your LDM are available at
extra cost from your local service center.
50
WALT service
e
Publicité
