Publicité
Les langues disponibles
Les langues disponibles
Handling
●
Use the apparatus only after checking that the assembly has properly been effected and con-
trolled by an adult person.
You may select to steps for massaging. "Playfully" changing motor speed during operation
may damage electrical parts and affect the service life of the apparatus. The apparatus will
start with the pre-selected speed (MIN. or MAX.) immediately after pressing the ON switch.
●
After half an hour of uninterrupted use the "MASSAGER" must be switched off for one hour
owing to the natural heat generation. If the apparatus is overloaded, the overload protection
integrated in the motor will respond. Then, the "MASSAGER" may only be started again after
a period of cooling down.
●
Owing to the operational heat generation there may be a certain smell in the first hours of
operation which is not caused by a malfunction.
●
The "MASSAGER" is a massaging apparatus for adults and no toy for children! Bear in mind
that the natural play instinct and temperament of children may cause unforeseen situations.
Should you let children use the apparatus, instruct them in the proper use of the apparatus
and keep an eye on them!
●
During operation, no person must seize into the area of rotating belt fixings. Danger of jamming!
●
Prior to use, adjust the apparatus to your body height (see figure 3). For adjustments use the
following illustrations as a guide.
●
Use environmentally friendly and not aggressive or corrosive agents for cleaning and main-
tenance. Clean the belt with a light soap solution.
When ordering spare parts, always quote the full item and spare-part numbers and serial number.
Example of order: 1 spare part no. 94600431 for item no.7842-600, serial number ...
Important: spare parts are always supplied and invoiced without fastening material. If faste-
ning material is required, this must be explicitly mentioned by adding the phrase „with
fastening material" to the spare-part order.
Assembly instructions
●
Assembly is to be carried out thoroughly by an adult person. Study these assembly instruc-
tions carefully before starting assembly work. Illustrations indicate the assembly sequence by let-
ters. Follow the indicated assembly steps such that a secure use and functioning is guaranteed.
● Please note that there is always a danger of injury when working with tools or doing manual work.
Therefore please be careful when assembling this machine.
● Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying
around. Always dispose packaging material in such a way that it may not cause any danger. There is always
a risk of suffocation if children play with plastic bags!
●
The front range of the apparatus's base frame includes two bores for a stationary floor instal-
lation. For a better stability, screw down the apparatus in the floor. The screw bag includes
appropriate fixing material (dowels and screws).
All manuals and user guides at all-guides.com
7
Publicité
