Heatsail BEEM Mode D'emploi page 60

All manuals and user guides at all-guides.com
EN
8. Troubleshooting
The light does not work
Switch of power. Lift up the glass panel and remove it by turning it. Now
you have access to the halogen bulb. Verify it is well inserted and not
broken. If you need to change the bulb replace it with a standard G4 16
Watt of 12 V.
Use a cloth or gloves to replace the bulb, touching it with hands shortens
the life considerably.
If the problem is not solved, verify that the blue and brown wires are well
inserted in the connection block. Refer to step 6. If still not working try to
reprogram the remote. (see further)
No heat.
None of the heating elements are working. Check if your BEEM® is
swithced on. Verify if all wires are well connected. (Step 6)
Heater is only partly working.
Either 1 module or 2 modules. Black or Grey wire not well connected. (Step
7).
Nothing works.
Verify if all wires are well inserted in the connector block. (Step 6)
60 Heatsail DOME®