Publicité
Les langues disponibles
Les langues disponibles
7.
OPERATION
Activate your BEEM®
After you have plugged the BEEM® into a suitable power outlet, you can switch
on the BEEM®. The left switch (marked low - 0 - high) switches the heater on. On
'LOW' only three side heaters work, on 'HIGH' all 5 side heaters work, and the
round bottom one. '0' switches the heater off.
When you switch on the BEEM®, it takes up to 30 minutes before the BEEM®
reaches it full temperature. Also when switched off, it may take up to 40 minutes
before the BEEM® has completely cooled down.
Button 1 (Light) :
Press 1 to switch on the light, press 0 to switch it off.
Keep pressing 1 down to dim.
Press it again to stop dimming.
Button 2 (Heating 1) :
Press 1 to switch the heating on, press 0 to switch it off.
Button 3 (Heating 2) :
Press 1 to switch the heating on, press 0 to switch it off.
Button G :
Not in use.
User manual
All manuals and user guides at all-guides.com
EN
1
2
3
G
59
Publicité
