Heatsail BEEM Mode D'emploi page 48

All manuals and user guides at all-guides.com
EN
To reduce the risk of fire, keep textiles, curtains, or any other flammable
material a minimum distance of 1 m from the BEEM®. Never cover it up
without pulling the plug from the socket!
The BEEM® must never be touched with naked, wet or moist body parts.
De BEEM® is made up of uit 6 (BEEM® 230, BEEM® 29) or 8 (BEEM® 390,
BEEM® 520) high radiance ceramic heating elements, mounted in a certain
direction on a reflective plate. As soon as the ceramic elements begin to
heat up, the full operating temperature will be reached within a time span
of 10 minutes. Please note: there is no noticeable glow in the infrared area.
Never use the BEEM® to light anything. The ceramic elements are fragile
and must be handled with due care. The same also applies to the glasses .
Always ensure that the BEEM® is installed in a roofed or covered
environment. Always keep the BEEM® free of snow.
The BEEM® is not allowed for use in greenhouses or building sites.
Heatsail will not be held responsible for damage resulting from non-
compliance with the instructions regarding use and maintenance.
3. Maintenance
3.1 Cleaning
Your BEEM® must be cleaned on a monthly basis.
The electrical supply must be disconnected via the installation's mains
switch or by disconnecting the plug before cleaning activities can
commence. Cleaning may only be done with a dry and soft cloth. Do not
use any abrasive cloths. Do not use detergents. Using a high pressure
and/or steam cleaner is prohibited. Cleaning is only permitted once the
BEEM® has completely cooled down.
Non-compliance with these rules may compromise the safety of the
device. Heatsail will not be held responsible for damage resulting from
non-compliance with the instructions regarding cleaning.
48 Heatsail DOME®