Bimar V305 Notice D'instructions page 8


Ventilation: select the desired speed with the selector (8):
1 – Minimum speed 2 – Medium speed 3 – Maximum speed
To turn off, turn the switch to position 0 and then remove the plug from the socket.
Horizontal oscillation (right-left): this is selected with the button (12) located on the motor body.
To stop the motion and keep the ventilator still, press the button.
Vertical inclination (high-low): it is regulated by gripping the motor body and orienting it in the
direction desired; you will hear "clicks" that indicate the fan's various positions.
When not in use for long periods, the plug must always be removed from the socket.
CLEANING AND MAINTENANCE
Attention: before normal cleaning, remove the plug from the socket.
 Ensure that the fan is switched off from the supply mains before removing the guard.
 Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
 Do not immerse any part of the fan in water or other liquid: if this should happen, do not put your
hand in the liquid, but first remove the plug from the socket. Carefully dry the appliance and
make sure that all the electrical parts are dry: in the case of doubt, ask for professionally qualified
help.
 It is essential that the motor's air holes be kept from dust and lint.
 Periodically check the electric cord for damage; its replacement requires a special tool: contact an
authorized service center, also for any repairs.
 If the fan will not be used for long periods, it must be protected from dust and humidity; we
recommend storing it in its original packaging.
 Should you decide not to use the appliance any more, we recommend making it inoperative by
cutting the power cord (after making sure you have disconnected the plug from the socket) and
make dangerous parts harmless if children are allowed to play with them (such as the blade).
 Do not dispose of non-biodegradable products in the environment but dispose of them in
accordance with current law. At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated waste collection centre or
to a dealer providing this service. Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to obtain significant savings in energy and
resources. Keep in mind that: -the control panel, knob and ring are plastic. -the grille, base, fan,
adjustable and fixed pole are metal. -wires of copper covered with rubber. –Electric motor is of
iron and copper made.
8 16
/