Publicité
Thermostat setting button
The interior temperature of your
refrigerator changes for the
following reasons
Seasonal temperatures
Frequent opening of the door and
leaving the door open for long
periods
Food put into the refrigerator without
cooling down to the room
temperature
The location of the refrigerator in the
room (e.g. exposing to sunlight).
You may adjust the varying interior
temperature due to such reasons by
using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
If the ambient temperature is higher
than 32°C, turn the thermostat button
to maximum position.
If the ambient temperature is lower
than 25°C, turn the thermostat button
to minimum position.
0
Defrost
A) Fridge compartment
Fridge compartment performs full-
automatic defrosting.
Water drops and a frosting up to 7-8
mm can occur on the inner rear wall of
the fridge compartment while your
refrigerator cools down. Such formation
is normal as a result of the cooling
system.
The frost formation is defrosted by
performing automatic defrosting
with certain intervals thanks to the
automatic defrosting system of the rear
wall. User is not required to scrape the
frost or remove the water drops. Water
resulting from the defrosting passes
from the water collection groove and
flows into the evaporator through the
drain pipe and evaporates here by
itself.
3
Publicité
