Controls - Hofmann Monty 3300 Notice D'utilisation

A
E
B
D
2
24
monty 3300 / 3300AIR
C
4.1-1
4.1-3

4.1 Controls

Before operating the machine ensure that you have well
understood the operation and function of all the controls
(Fig. 4.1-1).
A. Press down and release, WITH LEFT FOOT, the
first pedal from the left: the column tilts backwards.
Do it again: the column tilts forward.
DANGER OF BODY CRUSHING
B. Press down and release, WITH LEFT FOOT, the
second pedal from the left: the clamps of the turntable
will retract. Do it again: the clamps will expand. If you
press the pedal prior to the end of the stroke and release,
the clamps may be stopped in any position.
C. Press down and hold, WITH
F
pedal from the right: the turntable turns clockwise.
st
1 speed: 3/4 down approximately, the turntable
rotates at the minimum speed (8 rpm approx.). The
torque is maximum in this condition.
2 nd speed: All the way down the turntable rotates at
the maximum speed (13 rpm approx.).
Lift the pedal and the turntable turns counter-clockwise.
D. Open the bead breaker arm. Press down and hold,
WITH LEFT FOOT, the
doing this you operate the bead breaker blade and the
arm will move towards the machine. Release the pedal:
the bead breaker blade will retract.
DANGER OF LEG TRAPPING
E. The push button on the handle allows to release the
arms and drive the mount/demount tool in the correct
position.
1.
To unlock and let the slide with the tool go up: push the
button firmly with the forefinger, in the direction of the
arrow (A, Fig. 4.1-2).
2.
To unlock and let the slide with the tool go down: push
the button with the thumb in the direction of the arrow,
until the resistance increases (B, Fig. 4.1-2).
3.
To lock: push the button firmly with the thumb
4.1-2).
DANGER OF HAND CRUSHING
3
F. Press bead seater/inflator pedal on left side of the
machine down (1, Fig.
hose end.
Operator's Manual
RIGHT FOOT, the first
second pedal from the right: by
4.1-3): air will come from inflation
USA - CANADA
(C, Fig.