Controls - Hofmann monty 1620 Mode D'emploi

F
A
B
D
4.1-2
24
monty 1620 - 1625
E
D
C
4.1-1
D
4.1-3

4.1 Controls

Before operating the machine ensure that you have
well understood the operation and function of all the
controls (Fig. 4.1-1).
A.
· Press down and release, WITH LEFT FOOT, the
fi rst pedal from the left: the clamps of the turntable
will retract. Do it again: the clamps will expand. If
you press the pedal prior to the end of the stroke
and release, the clamps may be stopped in any
position.
B.
· Open the bead breaker arm. Press down and hold,
WITH LEFT FOOT, the second pedal from the
left: by doing this you operate the bead breaker
blade and the arm will move towards the machine.
Release the pedal: the bead breaker blade will
retract.
C.
· Press down and hold, WITH RIGHT FOOT, the fi rst
pedal from the right: the turntable turns clockwise (7
or 7/14 rpm). Lift the pedal and the turntable turns
counter-clockwise (7 rpm).
DANGER OF LEG TRAPPING
D.
· The lock handle enable the mount/demount tool to
be locked in the working position. Lower the lock
handle to unlock (Fig. 4.1-2) the vertical slide, lift
the handle to lock (Fig. 4.1-3).
E.
· Turn the adjustment knob (1, Fig. Fig. 4.1-1) for
positioning mount/demount head according to rim
diameter.
For machines without Tubeless wheel system:
F.
· Press bead seater/infl ator pedal on left side of
the machine (2, Fig. Fig. 4.1-1): air will come from
infl ation hose end only.
WHEN OPERATING THE INFLATOR IT IS MANDA-
TORY TO WEAR EAR PROTECTORS AND SAFETY
GLASSES TO PREVENT CONTAMINATION FROM
NOISE, DUST AND CHIPS BLOWN BY THE AIR
JETS.
Operator's Manual