Introduction - Hofmann Monty 3300 Notice D'utilisation

18
monty 3300 / 3300AIR

3.0 Introduction

Congratulations on purchasing the pneumatic-electric
tire changer: HOFMANN monty
This tIre changer is designed for ease of operation, safe
handling of rims, reliability and speed.
This combination of features means more profit and
added versatility for your shop.
With a minimum of maintenance and care your tIre
changer will provide many years of trouble-free
operation.
Instructions on use, maintenance and operational
requirements of the machine are covered in this manual.
READ THIS MANUAL THOROUGHLY BEFORE
USING THE MACHINE.
STORE THIS MANUAL IN A SAFE PLACE FOR
ANY FURTHER REFERENCE.
Application.
The tire changer is intended to be used as a device for
automatically demounting, mounting and beading car
and motorcycle tIres mounted on one-piece rims with
the following specifications:
Maximun tIre diam.:
Maximum tIre width:
This device must be used in the application for which it
is specifically designed.
Any other use shall be considered as improper and
thus not unreasonable.
The manufacturer shall not be considered liable for possible
damage caused by improper, wrong or unreasonable use.
Manuals to the unit.
• Operator's Manual
The operator must be familiar with it.
• Spare Parts Manual - Service Manual (Chapter 10
and up).
• Operator's Manual for Bead-pressing device
MH310/320 PRO
• Spare Parts Manual for Bead-pressing device
MH310/320 PRO
• Accessory Plan.
Installation instructions.
The installation instruction are in Chapter 9, Appendices.
EC DECLARATION
(Original document contained in Spare Parts Booklet)
Operator's Manual
mm 1000 (39")
381 mm (15")
(Chapter 1 – 9)
Manual for use by service personnel only.
#: ZEAA0329G33A03
#: TEAA0329G33A3
USA - CANADA