Introduction - Hofmann monty 3300racing AT Notice D'utilisation

18
monty 3300 RACING AT

3.0 Introduction

Congratulations on purchasing the pneumatic-electric
tire changer:
This tIre changer is designed for ease of operation, safe
handling of rims, reliability and speed.
With a minimum of maintenance and care your tIre
changer will provide many years of trouble-free
operation.
Instructions on use, maintenance and operational
requirements of the machine are covered in this
manual.
STORE THIS MANUAL IN A SAFE PLACE FOR
ANY FURTHER REFERENCE. READ THIS
MANUAL THOROUGHLY BEFORE USING THE
MACHINE.
Application.
The tire changer is intended to be used as a device for
automatically demounting, mounting and beading car
and motorcycle tIres mounted on one-piece rims with
the following specifications:
Maximun tIre diam.:
Maximum tIre width:
This device must be used in the application for which it
is specifically designed.
Any other use shall be considered as improper and
thus not unreasonable.
The manufacturer shall not be considered liable for
possible damage caused by improper, wrong or
unreasonable use.
Manuals to the unit.
• Operator's Manual
The operator must be familiar with it.
• Spare Parts Manual - Service Manual (Chapter 10
and up)
Manual for use by service personnel only.
• Operator's Manual for Bead-pressing device
MH310/320 PRO
• Spare Parts Manual for Bead-pressing device
MH310/320 PRO
Installation instructions.
The installation instruction are in Chapter 9, Appendices.
EC DECLARATION
(Original document contained in Spare Parts Booklet)
Operator's Manual
HOFMANN monty 3300 Racing AT
1000 mm (39")
381 mm (15")
(Chapter 1 – 9)
#: ZEAA0329G33A03
#: TEAA0329G33A3
USA - CANADA