Changing The Sound And Display Settings; Menu - Sony CDX-MP70 Mode D'emploi

Changing the sound and
display settings

— Menu

The following items can be set:
Set Up
• Clock (page 11)
• CT (Clock Time) (page 21)
• Beep — to turn the beeps on or off.
• AUX-A (page 30) — to turn the AUX source
display on or off.
Display
• D.Info (Dual Information) — to display the
clock and the play mode at the same time (on).
Functions only when SA is not set to B-1 – B-5.
• SA (Spectrum Analyzer) (page 29) — to
change the display pattern of the equalizer
display.
• Demo
– Select "on" to activate the Demo display.
The Demo display will appear about 10
seconds after the unit is turned off.
• Dimmer — to change the brightness of the
display.
– Select "Auto" to dim the display only when
you turn the lights on.
– Select "on" to dim the display.
– Select "off" to deactivate the Dimmer.
• Contrast — to adjust the contrast if the
indications on the display are not recognisable
because of the unit's installation position.
• Color — to select from a range of 7 display
colours.
• A.Scrl (Auto Scroll)
– Select "on" to scroll all automatically
displayed names exceeding 9 characters.
– When Auto scroll is set to off and the disc/
track name is changed, the disc/track name
does not scroll.
Play Mode
• Local on/off (Local seek mode) (page 16)
– Select "on" to only tune into stations with
stronger signals.
• Mono on/off (Monaural mode) (page 16)
– Select "on" to hear FM stereo broadcast in
monaural. Select "off" to return to normal
mode.
• REG on/off (Regional) (page 19)
Sound
• EQ7 Tune (page 27) — to adjust the equalizer
curve.
• HPF (High pass filter) (page 27)
• LPF (Low pass filter) (page 28)
• Loud (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
• AUX Level (page 30) — to adjust the volume
level of connected auxiliary equipment.
1
Press (MENU).
To set A.Scrl, press (MENU) during CD/MD
playback.
2
Rotate the ./> control dial until
the desired item appears.
3
Press the –m or M+ button to
select the desired setting (Example:
"on" or "off").
4
Press the ./> control dial.
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing
(DISC +) or (DISC -) on the card remote commander
for 2 seconds.
./> control
dial
25