B - Error Codes; Technical Data; Wiring Diagram - Olimpia Splendid Dolceclima Mode D'emploi Et D'entretien

d. Make water unload completely.
e. Reposition the rubber cap (24a) and screw the drain cap (24) (Fig.23).
f. Insert the plug in the power socket.
If the error repeats, please contact an Assistance Centre.

4.2.b - Error codes

During the appliance functioning, a few anomalies which stop its functioning could appear.
In these cases, some error codes appear on the control panel.
• P1 Lower tray full.
-------------------------------------------------------------------
• F1 Filters cleaning.
-------------------------------------------------------------------
• E1 • E2 • E3 • E4
In these cases:
a. electrically disconnect the appliance
b. wait a few minutes
c. connect the plug to the power socket
d. restart the appliance.
If the inconvenience persists and the error code doesn't turn off, electrically disconnect the
appliance and refer to an Assistance Centre.

5 - TECHNICAL DATA

For the technical data, please consult the data plate applied to the product (Fig.2).
• Dimensions (W x H x D)
• Weight (without packing)
• Maximum operating temperature
in cooling mode
• Minimum operating temperature
in cooling mode
* Internal ambient temp.
** Outside ambient temp.

6 - WIRING DIAGRAM

The wiring diagram is shown in image 24.
345 x 703 x 355 mm
24 Kg
DB 35°C - WB 24°C * / DB 43°C - WB 32°C **
17°C * / 16°C **
EN - 19
DOLCECLIMA COMPACT M