Publicité
Les langues disponibles
Les langues disponibles
160992A45R_GAS18V-3 12/21/17 12:40 PM Page 11
any assembly, adjustments or changing
attachments. Such preventive safety
measures reduce the risk of starting the
tool accidentally.
EPA Lead Based Paint Renovation,
Repair and Painting Program (RRP),
where lead may be present. Using this
vacuum cleaner for EPA RRP program
may cause health and environmental
hazards.
toxic substances or dusts, e.g.,
asbestos. The standard HEPA filter is
not able to capture all hazardous
particles, which may cause health
hazards.
dust and/or other materials that
include silica. The filter is not able to
capture all silica dust, which may cause
health hazards.
Ensure that the work area is clean and
tidy to minimize the risk of tripping.
▶ Starting Operation
Before vacuuming, ensure that the
filter assembly is assembled securely.
Only use an undamaged filter (no
cracks, small holes, etc.). Replace a
damaged filter immediately. See
"Cleaning/replacing HEPA filters".
-
Insert battery pack (see "Inserting
And Releasing Battery Pack"). Make
Fig. 10
5
A
B
All manuals and user guides at all-guides.com
Operating Instructions
Remove the battery
pack before making
Do
not
use
this
vacuum cleaner for
Do
not
use
to
vacuum hazardous or
Do
not
use
to
vacuum
concrete
C
2
sure the battery compartment cover
is securely closed.
▼ BATTERy CHARgE STATUS
INDICATOR
After activating the device, the five
green LEDs of the battery charging level
indicator 4 will light up individually
ascending and descending. Afterwards
the LEDs indicate the charging level of
the battery 20 (Fig 1).
▼ CLEANINg THE CANISTER
Clean the canister 1 after each use in
order to ensure that the vacuum cleaner
continues to perform optimally.
-
Switch the unit off and remove the
battery pack (See Inserting and
Releasing Battery Pack).
-
Unlock the latches 2 and remove the
control unit 5 (Fig. 10).
-
Shake out the canister 1 over a
suitable waste bin (Fig. 11).
-
If necessary, clean the canister with a
damp cloth. If necessary, clean the
filter (see "Cleaning/ replacing HEPA
filters").
-
Reattach the motor unit 5 and lock
the latches 2.
▼ CLEANINg/REPLACINg HEPA
FILTERS
Check filter period -
ically and replace if
worn out or damaged. Using damaged
filter can lead to release of unwanted
airborne contaminants from the
canister.
The suction power is dependent on the
1
Fig. 11
11
Publicité
