Publicité
Les langues disponibles
Les langues disponibles
GB
10.2
KS-Mobile with electric pump
EC Conformity Declaration to Machinery Directive 2006/42/EC Appendix II 1.A
The manufacturer / distributor
CEMO GmbH
In den Backenländern 5
D-71384 Weinstadt
hereby declares that the following product
Product designation:
Make:
Serial number:
Serial/type designation:
Description:
Mobile fuel filling station (IBC) with single-wall tank (as per ADR approval) and a capacity of 200 l
complies with all relevant specifications from the above-named directive and further applied directives
(see below), including their amendments applicable at the time of the declaration.
The following further EU Directives were applied: 94/9/EC ATEX Directive
The following harmonised standards were applied:
EN 1127-1:2007
EN 13478:2001+A1:2008
EN 60204-1:2006/A1:2009
EN 60204-1:2006
EN 61310-1:2008
EN 61310-2:2008
EN 61310-3:2008
EN 809:1998+A1:2009
EN ISO 12100:2010
Name and address of the legal entity authorised to assemble the technical documentation:
see above (= manufacturer)
Location: Weinstadt
Date: 26/11/2012
_______________________________
(Signature)
Eberhard Manz,
Managing Director CEMO GmbH
36
All manuals and user guides at all-guides.com
Mobile fuel filling station
CEMO
10755
KS-Mobile with electric pump
Explosive atmospheres – Explosion prevention – Part 1:
Basic concepts and methodology
Safety of machinery - Fire prevention
Safety of machinery – Electrical equipment of machines – Part 1:
General requirements (IEC 60204-1:2005/A1:2008)
Safety of machinery – Electrical equipment of machines – Part 1:
General requirements (IEC 60204-1:2005 (modified)
Safety of machinery – Indication, marking and actuation – Part 1:
Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007)
Safety of machinery – Indication, marking and actuation – Part 2:
Marking requirements (IEC 61310-2:2007)
Safety of machinery – Indication, marking and actuation – Part 3:
Requirements for the location and operation of actuators (IEC 61310-3:2007)
Pumps and pump units for liquids – General safety requirements
Safety of machinery – General principles of design –
Risk assessment and risk reduction
Publicité
