GE 28321 Mode D'emploi page 13

NOTE: It will take several NOTE: It will take several
minutes install new minutes install new
software. During this time software. During this time
you will not be able to use you will not be able to use
your phone. your phone.
NOTE: The software NOTE: The software
upgrade from the upgrade from the
network is split into two network is split into two
sequences. At the end sequences. At the end
of the second sequence, of the second sequence,
the base will reboot and the base will reboot and
finish software update. finish software update.
The Power and Ethernet The Power and Ethernet
LED will be steady on. LED will be steady on.
All manuals and user guides at all-guides.com
Operating Your Phone
Transfering a Call
You can transfer a call to another handset.
1. During a regular telephone call, press
and your call is put on hold. Enter the
handset number you want to join on the call
(1-5).
2. When the other handset answers inform
them they have a call, then press
. The call is then transferred. If the other
handset does not answer or you decide not
to transfer the call, press
resume the call.
3. Press
Firmware Updates
Your phone has the capability to receive
Handset and Base firmware upgrades.
1. When new firmware is available, the
handsets will display a New Firmware
Available screen, which will ask the user if
they want to perform an update.
2. You will have the option to download
firmware immediately or wait until later.
3. To down load the new firmware simply
follow the prompts in the handset screen.
4. During the software update the base LED's
will flash alternately with Power & Ethernet.
The handset will display firmware update in
process in the screen.
5. A firmware update notification is also
displayed on the handset with specific
screen and message when process is
complete.
to end the call.
13
to cancel and