Handling The Packed Appliance; How To Unpack The Appliance - Fimap UP36 Manuel D'utilisation Et D'entretien

The machine is consigned in specific packaging. These packaging
elements (plastic bags, clips, etc.) are potential sources of
danger and must not therefore be left within the reach of children,
incompetent persons, etc. The overall weight of the machine plus its
packaging is 12kg (unladen machine plus packaging).
The dimensions of the package are as follows:
U/M
A
B
C
The procedure for removing the device from its packaging is the
following:
1. Place the lower part of the outer packaging in contact with the
floor.
ATTENTION: Use the pictograms printed on the box as
reference.
2. Open the outer box.
3. Remove the accessories from the box and carefully lay them on
the ground.
4. Take the appliance out of the box.
ATTENTION: it is recommended that all the packaging
components be kept for any future transportation of the
appliance.
1
2
1
1

HANDLING THE PACKED APPLIANCE

UP 36-46
cm 64.5
cm 29
cm 34.5

HOW TO UNPACK THE APPLIANCE

8
9
ATTENTION: these operations must be carried out using
protective gloves to avoid any possible contact with the edges
or tips of metal objects.
The cardboard box contains:
1. Control handlebar.
2. Vacuum hose.
3. Brush head unit.
4. Fastening knobs.
5. Vacuum nozzle.
6. Flat lance.
7. Vacuum pipe.
8. Appliance body.
9. Fabric filter (additional).
10. Printed documents.
3
4
1
25
5
6
7