Preparation Of The Appliance; Handling The Packed Appliance; How To Unpack The Appliance; How To Transport The Appliance - Fimap FA15+ Manuel D'utilisation Et D'entretien

HANDLING THE PACKED APPLIANCE

The appliance is delivered in specific packaging. These packaging
elements (plastic bags, clips, etc.) are potential sources of danger
are potential sources of danger and must be kept out of the reach
of children, incompetent persons, etc. The overall weight of the
appliance plus its packaging is 13 kg.

HOW TO UNPACK THE APPLIANCE

The procedure for removing the device from its packaging is the
following:
1. Open the outer carton.
2. Remove the accessories inside the carton and gently lay them
on the ground.
3. Take out the vacuum head carton.
4. Take out the appliance from the box using the handle (1), taking
care not to damage either.
1

HOW TO TRANSPORT THE APPLIANCE

The procedure for the safe handling of the device is the following:
1. Take all necessary steps to ensure that the device is in a safe
condition (read the section "APPLIANCE
2. Remove the vacuum hose (1) from the vacuum nozzle (2) on the
collection tank, before pulling the vacuum hose press the button
(3) for unlocking the catch.
3. Insert the appliance into the protective bag, taking care not to
damage either during this operation.
4. Insert the appliance into the carton, taking care not to damage
either during this operation.
2
1

PREPARATION OF THE APPLIANCE

SAFETY").
3
The dimensions of the package are as
follows:
A : 400 mm
B : 420 mm
C : 540 mm
5. Take out the appliance from the protective bag using the relative
handle, taking care not to damage either.
ATTENTION: it is recommended that all the packaging
components be kept for any future transportation of the
appliance.
ATTENTION: You are advised to always wear protective gloves, to
avoid the risk of serious injury to your hands.
Remember to place at the bottom of the carton the block for the
wheels of the appliance, position around the collection tank the
blocks for preventing damage during transportation.
5. Insert the accessories support and the head block inside the
carton.
6. Place the accessories in the carton.
7. Close the carton.
ATTENTION: When transporting the appliance on vehicles,
secure it according to the directives in force so that it cannot
slide or tip over.
ATTENTION: You are advised to always wear protective gloves, to
avoid the risk of serious injury to your hands.
24