Bosch move BSGL2 Notice D'utilisation page 9

Innenteil 362 949 A
en de
Please fold out the picture page
Before using for the first time
Illustration 1*
Push the handle onto the flexible tube and until it
engages.
Starting up
Illustration 2
a) Lock the suction hose supports into the suction opening.
b) When removing the suction hose, press together both
latches and pull out the hose.
Illustration 3*
Connect the handle and the suction hose.
Illustration 4*
a) Connect the floor nozzle and the suction hose.
b) Connect the floor tool and the telescopic tube together.
Illustration 5*
a) Connect the suction hoses.
b) Unlock the telescopic pipe and adjust to the desired
length by moving the adjusting button / sliding sleeve in
the direction of the arrow.
Illustration 6
Take the mains cable by the plug and pull out the desired
length and then plug in to the mains socket.
Illustration 7
Switch on / off the vacuum cleaner by pressing the on /
off button in the direction of the arrow.
Illustration 8
Set the level of suction by turning the on / off button in
the direction of the arrow.
*Depending on version
11.06.2008 13:13 Uhr Seite 7
Suction
Illustration 9
Setting the floor nozzle:
fitted carpets and carpets
smooth floors
Illustration 10*
Vacuuming with accessories
(connect to the handle or the suction hose as required)
b) Corner nozzle
For vacuuming in corners and joins
c) Upholstery nozzle
For vacuuming upholstery, curtains etc.
e) Hard floor nozzle
For vacuuming hard floor surfaces (tiles, parquet etc.)
Illustration 11
When taking brief vacuuming pauses, you can use the
parking aid on the back of the appliance. Push the hook
on the floor nozzle in to the recess on the back of the
appliance.
Illustration 12
When vacuuming, e.g. stairs, the appliance can also be
carried using the two grips.
After work
Illustration 13
Pull out the mains plug.
Pull briefly on the mains cable and then let go
(the cable rolls up automatically).
Illustration 14
To store / transport the appliance, you can use the
storing aid on the underside of the appliance. Stand the
appliance up straight. Push the hook on the floor nozzle
in to the recess on the underside of the appliance.
7