Publicité
Les langues disponibles
Les langues disponibles
FR1000
OWNER'S MANUAL
All manuals and user guides at all-guides.com
OPERATING YOuR RAdIO
continued
button again to move to the next feature setting.
Note: If you select any CTCSS Privacy Code, any pre-selected DCS
Privacy Code will be cancelled and vice-versa. Selecting a Privacy
Code of "oF" will disable the Privacy feature. To communicate be-
tween two FR1000 Series radios, all radios in your group must be set
to the same channel and Privacy Code selections.
TRANSMIT (TX) POWER LEvEL SELEcTION
Your FR1000 Series has 2 power level settings. To select the power
level on channels 1~7 and 15~22, press the MENU button until a "Pr"
icon will appear on the display. Then turn the TUNING knob to select
TRANSMIT POWER LEVEL icon (HI/LO). To confirm, press the PTT but-
ton or press MENU button again to move to the next feature setting.
When the Battery Meter drops to 1 bar
, the TX Power will
automatically switch from HI to LO level.
Note: You cannot adjust the power setting on the FRS channels
(8~14). They are set to Low power per FCC regulations.
vOX (Hands-free Transmission)
Your radio has 3 VOX level settings: (oF/1/2/3). To set VOX, press
the MENU button until the display shows "Vo" while on the right, an
"oF" icon appears. Select "1", "2", or "3" by turning the TUNING knob
and push the PTT key, or press MENU button again to move to the
next feature setting. VOX will be more sensitive on the "1" setting
than on the "3" setting. To turn VOX off, press the MENU button
until the display shows "Vo" while on the right, a "1", "2" or "3" icon
appears. Select "oF" by turning the TUNING knob and push the PTT
key, or press MENU button again to move to the next feature setting.
1
Publicité
