Eton FR1000 Mode D'emploi page 14

All manuals and user guides at all-guides.com
OPERATING YOuR RAdIO
TRANSMITTING AND REcEIvING A cALL
To communicate, all radios in your group must be set to the same
channel and Privacy Code.
1. Press and hold the PTT button and speak in a normal voice into
the microphone. The TX icon will appear continuously on the LCD
Display while transmitting.
2. To receive a call, release the PTT button. The RX icon will appear
on the display when your radio is receiving a transmission.
AbOUT RANGE
Your FR1000 Series radios are designed to give you maximum range
under optimum conditions.
Optimum Conditions are:
• Over water
• Open rural areas without obstructions
• Flat areas where you can see the other person
To ensure you get maximum range:
• Be sure to use fresh or fully charged batteries - low batteries will
cause low power conditions
• Be sure you are on a GMRS channel - FRS channels are restricted
by the FCC to low power
• Be sure to set your radio to use Hi power.
• Be sure to point the ANTENNA upward.
1
FR1000 OWNER'S MANUAL
continued