Eton FR1000 Mode D'emploi page 18

FR1000 OWNER'S MANUAL
All manuals and user guides at all-guides.com
OPERATING YOuR RAdIO
continued
cALL ALERT SELEcTION
Your FR1000 Series has 5 selectable CALL ALERTS (oF/1~). To
select, press the MENU button until a "CA" icon appears and to the
right of the "CA" icon the current CALL ALERT setting is displayed.
Then turn the TUNING knob to make the CALL ALERT selections
- the radio will emit a corresponding tone for each selection. To
confirm, press the PTT button or press MENU button to move to the
next feature setting.
Note: Setting the CALL Alert to "oF" will disable the CALL Alert
function.
ROGER bEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished. To turn the ROGER
BEEP tone on, press the MENU button until the display shows an
"rb" icon while on the right of the "rb" display, an "oF" icon appears.
Select "on" by turning the TUNING knob and push the PTT key, or
press MENU button to move to the next feature setting. The ROGER
BEEP icon will appear on the display. To turn the ROGER BEEP tone
off, press the MENU button until the display shows an "rb" icon while
on the right of the "rb" display, an "on" icon appears. Select "oF" by
turning the TUNING knob and push the PTT key, or press MENU but-
ton to move to the next feature setting. The ROGER BEEP icon will
disappear on the display.
SILENT OPERATION
Your FR1000 Series has a SILENT OPERATION mode. In this mode,
all "beeps" and "tones" are disabled. To turn the SILENT OPERATION
mode on, press the MENU button until the display shows an "bP" icon
while on the right of the "bP" display, an "on" icon appears. Select
1