Publicité
Les langues disponibles
Les langues disponibles
FR1000
OWNER'S MANUAL
All manuals and user guides at all-guides.com
OPERATING YOuR RAdIO
continued
cALL ALERT
Your FR1000 Series can transmit a call alert for a fixed length of
time. To send a call alert, press the CALL/LOCK button. The TX icon
will appear while transmitting a call alert and a tone can be heard on
the speaker for confirmation. The FR1000 has 5 call alert selections.
kEYPAD LOck
To avoid accidentally changing the radio setting, press and hold
the CALL/LOCK button for about 4 seconds. The KEY LOCK icon will
appear on the display. The PTT, CALL, and MONITOR function will still
be active. Repeat the same procedure to unlock the keypad.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx.
5 seconds. The display illumination can also be activated when
the MENU, SCAN, and MONITOR button is pressed. It can also be
activated if the TUNING knob is turned.
Note: In Clock Mode (Power Off) the display illumination can be
activated by pressing the MENU, SCAN, and MONITOR button.
SETTING PRIvAcY cODES
Your FR1000 Series has 121 Privacy Codes available. The selected
Privacy Code may be different for each channel. To select a Privacy
Code for the current channel press the MENU button once, and then
turn the TUNING knob to select one of the 38 CTCSS Privacy Code.
Press again the MENU button and turn the TUNING knob to select
one of the 83 DCS Privacy Code. The Privacy Code icon on the display
will indicate whether you set your Privacy Code in CTCSS or DCS
mode. To confirm the selection, press the PTT button or press MENU
1
Publicité
