JVC KD-LX3R Manuel D'instructions page 36

EXTERNAL COMPONENT OPERATIONS
Playing an external component
When connecting an external component to the LINE IN plugs on the rear, you can select the
component as the sound source.
1
2
Operate the external component.
Notes:
• For the external component connection, see the Installation/Connection Manual (separate volume).
• See also "Assigning names to the sources" on page 27 if you want to match the name shown on the
display with the name of the connected component.
Using a subwoofer
By connecting a subwoofer to the SUBWOOFER OUT plugs on the rear, you can enjoy
enhanced bass sounds and a more realistic theater atmosphere in your car.
• Refer also to the instructions supplied with your subwoofer.
To set the subwoofer cutoff frequency, see "To select the subwoofer cutoff frequency" on
page 26.
To adjust the subwoofer output volume, see "Adjusting the sound" on page 16.
36
1
Select the external component.
Each time you press the button, the source changes as described on
page 5.