Publicité
Les langues disponibles
Les langues disponibles
SETTING SURFACE CONTROLS
1
7
3
5
2
4
1. Lock: Lock the cooktop controls to prevent ac-
cidental activation of cooking zones.
2. Power: Press to turn on or turn off the cooktop.
3. Cooking Zone Indicator: The LEDs indicate
cook zones. The one corresponding to the con-
trol's cook zone turns red.
4. TempControl (only for BLACKSTAD and
ÄLMESTAD): Activates TempControl feature.
When pressed, this feature uses a temperature
sensor to monitor heat and adjust the power
to main- tain a consistent temperature during
cooking. See page 16.
5. Cooking Zone On/Off: When cookware is on
the cooking zone, press to turn the zone ON/
OFF.
6. Cooking Zone Power Level: Slide a finger
across or press a number to set the power level.
Level 1 is low, level 9 is high, and P is the most
powerful setting.
14
6
8
8c
8a
8b
7. Bridge (only for BLACKSTAD and ÄLMES-
TAD): The Bridge indicator is visible on Zone
1 if both left cooking zones detect cook-
ware. The Bridge function makes the
two left cooking zones work together
to heat a long piece of cookware, like a
griddle
8. Timer Indicator: Shows the time currently left
on the timer.
a. Reduce Time (-): Press to reduce the
amount of time on the timer.
b. Timer On/Off: Press to turn the countdown
timer on or off.
c. Increase Time (+): Press to increase the
amount of time on the timer.
9. Serve Warm: Activates the Serve Warm fea-
ture.
Serve Warm will set all of the cooking zones to a
low power level to keep foods warm.
en
9
Publicité
