Toro Titan X4850 Manuel De L'utilisateur page 4

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Gross or Net Torque: The gross or net torque
of this engine was laboratory rated by the engine
manufacturer in accordance with the Society of
Automotive Engineers (SAE) J1940 or J2723. As
configured to meet safety, emission, and operating
requirements, the actual engine torque on this class
of mower will be significantly lower. Please refer to
the engine manufacturer's information included with
the machine.
Go to www.Toro.com to view specifications on your
model.
Important:
If you are using a machine with a Toro
engine above 1500 m (5,000 ft) for a continuous
period, ensure that the High Altitude Kit has been
installed so that the engine meets CARB/EPA
emission regulations. The High Altitude Kit
increases engine performance while preventing
spark-plug fouling, hard starting, and increased
emissions. Once you have installed the kit, attach
the high-altitude label next to the serial decal on
the machine. Contact any Authorized Service
Dealer to obtain the proper High Altitude Kit and
high-altitude label for your machine. To locate
a dealer convenient to you, access our website
at www.Toro.com or contact our Toro Customer
Care Department at the number(s) listed in your
Emission Control Warranty Statement.
Remove the kit from the engine and restore the
engine to its original factory configuration when
running the engine under 1500 m (5,000 ft). Do
not operate an engine that has been converted
for high-altitude use at lower altitudes; otherwise,
you could overheat and damage the engine.
If you are unsure whether or not your machine
has been converted for high-altitude use, look for
the following label.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
All manuals and user guides at all-guidesbox.com
Introduction
This rotary-blade, riding lawn mower is intended to be
used by homeowners in residential applications. It is
designed primarily for cutting grass on well-maintained
lawns. It is not designed for cutting brush, mowing
grass and other growth alongside highways, or for
agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number plate
Write the product model and serial numbers in the
decal127-9363
space below:
Model No.
Serial No.
The safety-alert symbol
this manual and on the machine to identify important
2
With your mobile device, you can
Figure 1
(Figure 2) appears both in
Contact us at www.Toro.com.
All Rights Reserved
Figure 1
g297254
Printed in the USA