Toro Titan X4850 Manuel De L'utilisateur page 20

5. Remove the carriage bolt and locknut on the
side wall of the mower deck securing the left
baffle to the deck.
6. Remove the left baffle from the mower deck as
shown in Figure 12.
7. Remove the 2 carriage bolts (5/16 x 3/4
inch) and 2 locknuts (5/16 inch) securing the
assembled right baffle and baffle guard to the
mower deck (Figure
Figure 13
1. Carriage bolt (5/16 x 3/4
inch)
2. Locknut (5/16 inch)
8. Remove the 2 locknuts (5/16 inch) to securing
the welded posts of the right baffle to the top of
the mower deck at the center and right of center
positions (Figure 14).
Note:
Remove the right baffle from the mower
deck.
Figure 14
1. Locknut (5/16 inch)
2. Right baffle
All manuals and user guides at all-guidesbox.com
13).
g191136
3. Right baffle
4. Baffle guard
g010704
3. Welded posts (right baffle)
9. Locate the cutoff baffle in the loose parts bag
and remove the fasteners at the rear holes of
the discharge plate
1. Carriage bolts (existing)
2. Rear holes in the
discharge plate
10. Install the baffle at the side discharge opening
on the mower deck.
11. Use the fasteners removed to secure the cutoff
baffle to the deck.
12. Install the mower deck; refer to
Mower Deck (page
Machines with 137 cm (54-inch)
Mower Decks
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the mower deck; refer to
Mower Deck (page
4. Remove the 3 locknuts (5/16 inch) secured to
the welded posts of the left baffle on the top of
the mower deck at the center, left of center, and
left positions (Figure
18
(Figure 15).
Figure 15
3. Cutoff baffle (loose)
4. Locknuts (existing)
Installing the
50).
Removing the
49).
16).
g190734