Adventys DTIC 6000 Guide D'utilisation page 18

Power setting
When an induction-friendly pan is on the cooktop product. The power display indicates the level of regulation.
The level of regulation indicate is or a power level between 1 and 20.
It is at any time possible to press on touches (+) or (-) POWER to increase or decrease the level of regulation of
power.
Leveli Wttta
1 50
2 100
3 200
4 300
5 500
6 700
7 900
8 1100
9 1200
10 1300
When the pan is pick-up of the cooking zone, the selected power on the screen displayed will start to
blink with a frequency of 1Hz, which means that the pan is missing.
If the power selected on the screen keeps blinking when a pan is on top of the cooking zone, it means
that:
The pan is NOT induction friendly
Uae of the preaet P1, P2 et P3
The user can allocate power selection from 1 to 20, to the 3 programmable touches P1,
P2, and P3, regarding its most often used power usages. The three selected power P1,
P2, and P3, once memorized, can be use right the way by the user, instead of selecting
the powers with the (+) and(-) controls.
To assign and memorize a level of power on one of those three touches P1, P2, and P3,
the user has to first adjust the level of power to be memorized (between 1 and 25),
with the touches (+) and (-).
Then, in order to memorize, the uaer ahouli d holid for tt li e tat 3 nonatop aeconda hia or
her finger on either P1, P2 , or P3 touchea. A "BIP" sound signal means that the power
is saved and memorized. You can change and memorized as many different power as
you like.
During usage, a simple touch on P1, P2, or P3 is enough to affect the level
of power desired (just like the touches (+) and (-) controls).
DTIC 4000
Leveli Wttta
11 1500
12 1700
13 1900
14 2100
15 2300
16 2550
17 2800
18 3100
19 3400
20 4000
DTIC 6000
Leveli Wttta
1 50
2 100
3 200
4 300
5 500
6 700
7 900
8 1100
9 1350
10 1600
Leveli Wttta
11 1900
12 2400
13 2900
14 3500
15 4000
16 4500
17 4900
18 5300
19 5800
20 6000
18