Tineco CARPET ONE Serie Mode D'emploi page 25

Dirty Water Tank
②
①
Floater
• When dirty water reaches the Max line, the appliance will stop working and show a reminder on the
display and play a voice prompt.
• Step on the recline pedal and press the DWT handle to remove it.
• Pull up the tank lid and mesh filter to empty the DWT. Use the cleaning tool to remove remaining
debris. Rinse the inside of the DWT & tank lid & floater & mesh filter and place back into the
appliance.
Note:
Check if the floater is in good condition and press it to the bottom.
Sponge Filter
Remove the DWT, take the filter out and wash it
after each use.
Mesh Filter
23
Reinstall.