Publicité
Les langues disponibles
Les langues disponibles
Stop Working
In AUTO/MAX/DRY mode, the appliance will
stop working when put uprightly and start
running again when you recline.
Note:
• Pretreat spots and heavy traffic areas with Tineco Pretreat Cleaning Solutions to achieve better
cleaning effect. Follow Directions on bottle.
• The carpet cleaner differs from the traditional vacuum cleaner.
• In all modes, it blows hot air, whose temperature is 158-176°F (70-80°C).
* Appropriate temperature is conducive to dissolve the dirt and helps surfactant in the solution to decompose the dirt.
• In AUTO/MAX mode, it sprays water when moving forward and stops spraying when moving backward.
• Take a spot test on a small and marginal area of the carpet for colorfastness. Gently rub surface
with a damp white cloth. Then wait ten minutes and check for color removal or bleed with a white
paper towel.
• During use, don't keep the appliance at a resting position for a long time.
• Important: Keep the foot of the deep cleaner perpendicular to the rug's edge with each cleaning
pass to prevent damage.
• Important! Please check manufacturer's tag before cleaning area rugs for any specialized cleaning
instructions. We do not recommend deep cleaning delicate, silk, wool, antique or area rugs
without a manufacturer's tag.
• Some Loop Berber carpets, Natural Fiber (including silk and wool), and Soft Fiber carpets can fuzz
with wear. Some vacuums & carpet cleaners can worsen this carpet wear. If cleaning on Berber,
Natural Fiber, or Soft Fiber carpeting, first test a small hidden area of carpet by running the carpet
washer over it. If no fuzzing or overwetting occurs, continue cleaning. Avoid overwetting Berber
carpets. If you have any questions or concerns, consult with your carpet manufacturer on deep
cleaning recommendations.
• Do not use on rugs or carpet when dry cleaning is recommended.
• For upholstery, check cleaning code - Use your Tineco Carpet Washer only if the upholstery
fabric is marked with a "W" (for "wet" clean) or "S/W" (for "solvent/dry" or "wet" clean). Do not
clean fabric marked "S" ("solvent/dry" clean only). If your upholstery does not have a code, seek
professional assistance
• Test for colorfastness - Wet a white absorbent cloth with the solution. In a small, hidden area,
gently rub the surface with the dampened cloth. Wait ten minutes and check for color removal or
bleed with white paper towel or cloth. If surface has more than one color, check all colors.
Grip the back carry handle to lift or move
appliance. Empty CWT and DWT after each
use.
15
Do not grip DWT handle to
lift or move the appliance.
Publicité
