Tineco CARPET ONE Serie Mode D'emploi page 19

Cleaning Mode Selection
AUTO Mode
• In AUTO mode, the iLoop sensor automatically detects how dirty the carpet is and applies the
appropriate volume of water spray.
• A red dirt monitoring loop indicates more dirt is detected, and a blue loop indicates less dirt is
detected. This mode automatically provides the best cleaning solution.
MAX Mode
• In AUTO mode, press the
turn off.
• The iLoop only displays the dirty amount, and the spray volume keeps at the maximum of "100".
• In MAX mode, the appliance will apply max spray volume.
button to enter MAX mode. The AUTO indicator on the display will
17
Clean: on Min spray volume
Blue
The default spray volume is "60", vary
depending on dirt amount
Heavy dirt: on Max spray volume
Red