Overview - Sony VPL-FW300L Manuel D'installation

On cleaning the lens
The lens surface is especially treated to reduce reflection
of light.
As incorrect maintenance may impair the performance
of the projector, take care with respect to the following:
• Avoid touching the lens. To remove dust on the lens,
use a soft dry cloth. Do not use a damp cloth, detergent
solution, or thinner.
• Wipe the lens gently with a soft cloth such as a
cleaning cloth or glass cleaning cloth.
• Stubborn stains may be removed with a soft cloth such
as a cleaning cloth or glass cleaning cloth lightly
dampened with water.
• Never use solvent such as alcohol, benzene or thinner,
or acid, alkaline or abrasive detergent, or chemical
cleaning cloth, as they will damage the lens surface.
On cleaning the cabinet
• Clean the cabinet gently with a soft dry cloth.
Stubborn stains may be removed with a cloth lightly
dampened with mild detergent solution, followed by
wiping with a soft dry cloth.
• Use of alcohol, benzene, thinner or insecticide may
damage the finish of the cabinet or remove the
indications on the cabinet. Do not use these chemicals.
• If you rub on the cabinet with a stained cloth, the
cabinet may be scratched.
• If the cabinet is in contact with a rubber or vinyl resin
product for a long period of time, the finish of the
cabinet may deteriorate or the coating may come off.
On repacking
Save the original shipping carton and packing material;
they will come in handy if you ever have to ship your
unit. For maximum protection, repack your unit as it was
originally packed at the factory.

Overview

This manual describes how to install the Sony VPL-
FH300L/FW300L Data Projector, how to attach a lens to
the projector, and installation diagrams.
15
Overview