Lincoln Electric POWER MIG 210 MP Manuel De L'opérateur page 7

POWER MIG ® 210 MP
PRODUCT DESCRIPTION
PRODUCT SUMMARY
The Power MIG™ 210 MP is a multi-process CC/CV DC inverter rated
for 200 amps, 24 volts at a 25% duty cycle. The Power MIG™ units
are intended for fabrication, maintenance, home, and autobody
shops. The unit features a portable and rugged case. The user
interface features a 3.5 inch color TFT LCD display for selecting weld
processes and adjusting parameters. The user will have the ability
to adjust; inductance, run-in, spot time, arc force, and hot start. The
machine also features a cast aluminum based wire drive system and
an integrated switch for activating a Magnum Pro 100SG spool gun.
The Power MIG™ 210 MP is designed for the North American market
and operates on 120 or 230 single phase 60 Hz power. An overview
of the machines input and output capabilities are listed on the rating
plate shown at right.
• The Power MIG 210MP is Magnum Pro 100SG spool gun ready; the
spool gun switch is preinstalled from the factory and an option is
present within the user interface which permits activating the spool
gun wire drive. Both items must be selected to activate the spool gun.
• A storage tray mounted inside the plastic case front and case back
provide space for spare tools such as drive rolls and contact tips.
• The machine comes with a plethora of accessories including:
• Magnum Pro 175L gun
• Work cable with clamp
• Spare contact tips and drive rolls
• Two wire guides
• Gas regulator and gas hose
• Gas and gasless nozzle
• Two input power cords (120V & 230V)
• Electrode holder and cable
• Sample spool of MIG and FCAW wire
• Spindle adapter
• Quick setup guide and literature
7
PRODUCT DESCRIPTION