Toro 29642 Manuel De L'utilisateur page 10

Installing the Grass Bag
1. Lift up the rear deflector (Figure 15).
Figure 15
1. Rear deflector
2. Insert the grass bag handle onto the notches on the
handle brackets and make sure that it is well seated
(Figure 15).
Removing the Grass Bag
1. Lift up the rear deflector (Figure 15).
2. Lift the grass bag handle out from the notches on the
handle brackets and remove the bag from the mower.
3. Close the rear deflector.
Discharging the Clippings
Use the rear-discharge deflector for cutting very tall
grass.
Note: The rear-discharge deflector is an optional piece
of equipment that must be purchased separately.
Installing the Rear-Discharge Deflector
1. If the bag is on the mower, remove it.
2. Lift up the rear deflector and hold it (Figure 16).
3. Insert the tab on the rear-discharge deflector into the
right-hand slot in the rear deflector (Figure 17).
4. Insert the rod on the rear-discharge deflector into
the notches on the mower (Figure 18).
Removing the Rear-Discharge Deflector
To remove the rear-discharge deflector, reverse the steps
above.
Operating Tips
General Mowing Tips
• Clear the area of sticks, stones, wire, branches, and
other debris that the blade could hit.
• Avoid striking solid objects with the blade. Never
deliberately mow over any object.
10
Figure 16
Figure 17
Figure 18