Seca 655 Mode D'emploi page 117

Activating/deactivating the WiFi
Connecting the device to the WiFi
network (seca connect 103)
Connecting the device to the WiFi
network (WPS)
To activate/deactivate the WiFi function for the device, proceed as follows:
function
1. Press the
The Settings menu is displayed.
2. Press the
3. Press the Network item.
The current setting is displayed.
4. Press the desired setting for the WiFi item:
–
–
5. To exit the menu, press the
Connect your device to the WiFi network via the
you do not have access to the WPS function of the router or want to integrate
several devices:
1. Make sure that the WiFi function of the device is activated ➔
deactivating the WiFi function, page
2. Enter the data for the WiFi network in the
described in the system instructions for use for the software.
The software generates a QR code containing the entered information.
3. Make sure that a barcode scanner is connected to the device
➔
Connecting a barcode scanner (optional), page
4. Scan the QR code from the software user interface.
The settings carried out in the
the device.
The device connects to the router of the WiFi network.
As soon as the device is connected to the WiFi network, the
is permanently on.
Connect your device to the WiFi network via WPS if no barcode scanner is
connected to the device and you have access to the router.
1. Make sure that the WiFi function of the device is activated ➔
deactivating the WiFi function, page
2. Press the WPS button on the router and on the connection panel on the
weighing platform.
key.
or key until the Network menu item is displayed.
Function activated
Function deactivated
key.
Device mode
Basic
Advanced
Expert
Service
seca connect 103
Function available
–
–
•
•
seca connect 103
Activating/
117.
seca connect 103 software as
94.
software are stored in
Activating/
117.
Configuration • 117
English
software if
symbol