Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
USE OF EXTENSION CORD
Make sure your extension cord is in good condition. When using an extension cord, be sure to use one
heavy enough to carry the current your product will draw.
An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table shows
the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number, the heavier the cord.
Ampere rating
More
Not more
than
than
0 – 6
6 – 10
10 – 12
12 – 16
WARNING
Avoid electrical shock hazard. Never use this tool with a damaged or frayed electrical cord or
extension cord.
Inspect all electrical cords regularly. Never use in or near water or in any environment where
electric shock is possible.
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO
OWNERS OF THIS TOOL!
6
MINIMUM GAGE FOR CORD SETS
Total Length of Cord in Feet (Meter)
0 – 25
26 – 50
(0 – 7.6)
(7.9 – 15.2)
18
18
16
14
AND
OTHER USERS
AND
51 – 100
(15.5 – 30.5)
AWG
16
16
16
14
16
14
12
Not recommended
101 – 150
(30.8 – 45.7)
14
12
12
Publicité
Table des Matières
