Burkert 8681 Instructions page 6

Basicsafetyinstructions
2 BASIC SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any
• contingencies and events which may arise during the assembly,
operation, and maintenance of the devices.
• local safety regulations – the operator is responsible for observing
these regulations, also with reference to the installation personnel.
DANGER!
Danger – high pressure.
▶ Before loosening lines and valves, turn off the pressure and vent
the lines.
Risk of electric shock.
▶ Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations
for electrical equipment.
Risk of burns and danger of fire during long-term operation
due to hot device surface.
▶ Keep the device away from highly flammable substances and
media and do not touch with bare hands.
All manuals and user guides at all-guides.com
Type 8681
WARNING!
General hazardous situations.
To prevent injuries:
▶ Ensure that the system cannot be activated unintentionally.
▶ Installation and maintenance work may be carried out only by
authorized technicians with the appropriate tools.
▶ After an interruption in the electrical or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
▶ The device must only be operated when in a perfect condition
and in consideration of the operating instructions.
▶ The general rules of technology must be observed for applica-
tion planning and operation of the device.
NOTE!
Electrostatic sensitive components or modules.
The device contains electronic components which react sensitively
to electrostatic discharge (ESD). Contact with electrostatically
charged persons or objects are hazardous to these components.
In the worst case scenario, they will be destroyed immediately or
will fail after start-up.
• Observe the requirements in accordance with EN 61340-5-1 to
minimize or avoid the possibility of damage caused by sudden
electrostatic discharge.
• Also ensure that you do not touch electronic components when
the supply voltage is on.
english
5