Kenwood DPX530BT Mode D'emploi page 17

BLUETOOTH®
• This unit supports Secure Simple Pairing (SSP).
• Up to 10 devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device
will remain registered in the unit even if you reset the
unit. To delete the paired device,
Once pairing is completed, Bluetooth connection is
established automatically. "BT1" and/or "BT2" indicator
on the faceplate lights up.
• A maximum of two Bluetooth phones and one
Bluetooth audio device can be connected at any
time.
• Some Bluetooth devices may not automatically
connect to the unit after pairing. Connect the device
to the unit manually.
• Refer to the instruction manual of the Bluetooth
device for more information.
Auto Pairing
When you connect iPhone/ iPod touch/ Android
device to the USB input terminal, pairing request (via
Bluetooth) is automatically activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned
on.
– [AUTO PAIRING] is set to [ON]. ( 16)
– KENWOOD MUSIC PLAY application is installed
on the Android device ( 7) and [BROWSE MODE] is
selected ( 8).
BLUETOOTH — Mobile phone
16, [DEVICE DELETE].
Receive a call
When there is an incoming call:
• ZONE 2 illuminates in green color and flashes.
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 14)
During a call:
• The display illuminates according to the settings made for [DISPLAY] ( 20, 21) and ZONE 2
illuminates in green color.
• If you turn off the unit, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To
First incoming call...
Answer a call
Reject a call
End a call
On the faceplate
Press or the volume knob or
one of the number buttons (1 to 6).
Press .
Press .
On the remote control
Press .
Press .
Press .
13
ENGLISH