Kenwood DPX530BT Mode D'emploi page 10

RADIO
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
automatically canceled.
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then press
the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
TUNER SETTING
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)
MONO SET ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
TI ON: Allows the unit to temporarily switch to Traffic Information if available ("TI"
lights up). ; OFF: Cancels.
Select the available Program Type (see the right column), then, press S / T
PTY SEARCH
to start.
CLOCK
TIME SYNC ON: Synchronizes the unit's time to the Radio Broadcast Data System station time. ;
OFF: Cancels.
6
2
, Direct Access Tuning is
.
Default: XX
Available Program Type for PTY SEARCH
SPEECH : NEWS, INFORM (information), SPORTS, TALK, LANGUAGE, REL
TALK (religious talk), PERSNLTY (personality), PUBLIC, COLLEGE,
HABL ESP (spanish talk), WEATHER
MUSIC : ROCK, CLS ROCK (classic rock), ADLT HIT (adult hits), SOFT RCK
(softrock), TOP 40, COUNTRY, OLDIES, SOFT, NOSTALGA (nostalgia),
JAZZ, CLASSICL (classical), R & B (rhythm and blues), SOFT R&B (soft
rhythm and blues), REL MUSC (religious music), MUSC ESP (spanish
music), HIP HOP
The unit will search for the Program Type categorized under [SPEECH] or
[MUSIC] if selected.
• [MONO SET]/ [TI]/ [PTY SEARCH] is selectable only when the band is
FM1/ FM2/ FM3.
• If the volume is adjusted during reception of traffic
information, the adjusted volume is memorized automatically.
It will be applied the next time traffic information is turned on.