JVC BR-DV600AE Mode D'emploi page 25

Using the wireless remote controller
Before using the wireless remote controller,
please set the REMOTE SEL. switch to
"WIRELESS".
Caution on using the wireless remote controller
When more than 2 VTRs are being individually operated in the same place, please ensure that the
front panel REMOTE SEL. switches of all VTRs except the one to be manipulated, are NOT set at
"WIRELESS".
Operable scope of the wireless remote controller
Sensor for the wireless remote controller
OPERATE
A.DUB
Mini
PROFESSIONAL
CH-1/3
MIC REMOTE SEL. INPUT SEL.
CH-2/4
SERIAL LINE
9PIN WIRELESS DV Y/C
Notes
• The remote controller will hardly work if there are obstructive objects between the remote control
sensor of the main unit and the remote controller.
• The remote controller will hardly work when sunlight or strong light shines directly on the remote
control sensor of the main unit.
• Do not press the buttons on the main unit and the remote controller simultaneously for this may
cause malfunction.
EJECT
MENIU
REC PLAY PAUSE
DVCAM NTSC PAL REC INH.
SET
REW STOP
FF
BR-DV3000
About 30˚
OPERATE
A.DUB
Mini
DVCAM NTSC
PROFESSIONAL
CH-1/3
MIC REMOTE SEL. INPUT SEL.
CH-2/4
SERIAL LINE
9PIN WIRELESS DV Y/C
BR-DV3000
Sensor for the wireless remote controller
Maximum distance to the sensor
of the unit : 6m
Angle
Not further than 6m
About 30˚
EJECT
MENIU
REC PLAY PAUSE
PAL REC INH.
SET
REW STOP FF
: within 30˚
E-25